Calcium-based coordination polymers from a solvothermal synthesis of HKUST-1 in 3D printed autoclaves

A mixed-metal 1D coordination polymer [CaCu(HBTC)₂(H2O)₈]_n (where H₃BTC – benzene-1,3,5-tric arboxylic acid) was obtained in a solvothermal synthesis of a well-known copper-containing metal–organic framework [Cu₃(BTC)₂(H₂O)₃]_n (HKUST-1) in autoclaves 3D-printed from commercial polypropylene. This material was a source of calcium ions, apparently, leaking from a colorant (calcium carbonate) promoted by glacial acetic acid as a modulator used to produce large single crystals of HKUST-1. This finding was confirmed by elemental analysis and a model experiment that resulted in a new calcium-based 1D coordination polymer [Ca(H₂BTC)₂(H₂O)₅]_n under the same solvothermal conditions with no copper or calcium salts put into a 3D-printed autoclave.     

A Porous Sulfonated 2D Zirconium Metal–Organic Framework as a Robust Platform for Proton Conduction

By using the strategy of pre-assembly chlorosulfonation applied to a linker precursor, the first sulfonated zirconium metal–organic framework ( JUK-14 ) with two-dimensional (2D) structure, was synthesized. Single-crystal X-ray diffraction reveals that the material is built of Zr₆O₄(OH)₄(COO)₈ oxoclusters, doubly 4-connected by angular dicarboxylates, and stacked in layers spaced 1.5 nm apart by the presence of sulfonic groups. JUK-14 exhibits excellent hydrothermal stability, permanent porosity confirmed by gas adsorption studies, and shows high (>10⁻⁴ S/cm) and low (<10⁻⁸ S/cm) proton conductivity under humidified and anhydrous conditions, respectively. Post-synthesis inclusion of imidazole improves the overall conductivity increasing it to 1.7×10⁻³ S/cm at 60 °C and 90 % relative humidity, and by 3 orders of magnitude at 160 °C. The combination of 2D porous nature with robustness of zirconium MOFs offers new opportunities for exploration of the material towards energy and environmental applications.     

Three-ligand Co-assembled 2D Au(I)-Thiolate Nanosheets

Two-dimensional (2D) Au(I)-thiolate assemblies are a special type of material that can balance high structural stability and rich surface functionality, which shows promising prospects in both fundamental research and applications. Co-assembly of multiple ligands is a facile way to further enrich the surface properties and functions, and expand their application potentials. In this work, taking 3-mercaptopropionic acid (MPA), cysteine (Cys) and 1-thioglycerol (TGO) as example ligands, we studied in detail the possibility to co-assemble them into one nanosheet. Although the three ligands have significantly different controllability and pathways when self-assembling individually with Au(I), they can still be effectively co-assembled by reacting with HAuCl₄ together to obtain three-ligand nanosheets with good colloidal stability. The key points for successful co-assembly are also revealed by comparing single- and three-ligand self-assembly processes, laying a solid foundation for co-assembly of even more ligands. The easy but powerful strategy for 2D materials with closely-packed and multiple tunable surface functional groups addresses the surface engineering problem for 2D materials and paves the way for their wider applications in sensing and biomaterials.     

Photodegradation actuated shape-changing hydrogels

Hydrogels are attractive materials for generating 4D shapes due to their ability to undergo pronounced volume changes in response to several stimuli, including light. We previously reported shape-changing hydrogels actuated by long-wave UV and visible light in the presence of live cells using poly(ethylene glycol) macromers incorporating different photodegradable ortho-nitrobenzyl (o-NB) groups. In this comprehensive study, we determine the effect of chemical structure of different o-NB macromers (which influences molar absorptivity and rate constant of degradation), composition (macromer weight percent), fabrication design (initial gel thickness) and environment (ionic strength of solution) on light-induced hydrogel folding. We demonstrate successful photopolymerization and subsequent photodegradation of hydrogels, multistep folding, and live-cell encapsulation. This hydrogel system may be useful as new tool in stem cell differentiation and developmental biology research, facilitating the in vitro investigation of processes that are sensitive to both physical and temporal stimuli.     

Two-Dimensional Covalent and Supramolecular Polymers: From Monolayer to Bilayer and the Thicker

Selective preparation of two-dimensional polymers (2DPs) and supramolecular polymers (2DSPs) with defined thickness is crucially important for controlling and maximizing their functions, yet it has remained as a synthetic challenge. In the past decade, several approaches have been developed to allow selective preparation of discrete monolayer 2DPs and 2DSPs. Recently, crystal exfoliation and self-assembly strategies have been employed to successfully prepare bilayer 2DP and 2DSP, which represent the first step towards the controlled “growth” of 2D polymers from the thinnest monolayers to thicker few-layers along the third dimension. This Concept review discusses the concept of accurate synthesis of 2D polymers with defined layers. Advances in this research area will pave the way to rational synthetic strategies for 2D polymers with controlled thickness.     

On the derivation of the entropy of ideal quantum gases confined in a three-dimensional harmonic potential

In this work,the entropy functions of ideal quantum gases in a three-dimensional harmonic trap are analytically calculated using temperature as an explicit variable.Afterward,the applicability of the analytical formulas is validated by comparison with the numerical calculation.The results illustrate that the obtained functions could be applied for the whole temperature regime with a maximum relative deviation of less than 7.5%in the vicinity of the critical temperature Tcin the case of Bose gases.Meanwhile,for Fermi gases,although the analytical formula fits well at very low-and high-temperature regimes,it cannot be applied at temperature in the range[0.3-0.5]T_F,where T_F is the Fermi temperature.In addition,the consistency between our formulas and classical ones at significantly high temperatures is also discussed.     

Hydrogeochemical modeling for groundwater management in arid and semiarid regions using MODFLOW and MT3DMS: A case study of the Jeffara of Medenine coastal aquifer,South-Eastern Tunisia

The study of water quality and the quantification of reserves and their variations according to natural and anthropogenic forcing is necessary to establish an adequate management plan for groundwater resources. For this purpose, a modeling approach is a useful tool that allows, after calibration phase and verification of simulation, and under different scenarios of forcing and operational changes, to estimate and control the groundwater quantity and quality. The main objective of this study is to collect all available data in a model that simulates the Jeffara of Medenine coastal aquifer system functioning. To achieve this goal, a conceptual model was constructed based on previous studies and hydrogeological investigations. The regional groundwater numerical flow model for the Jeffara aquifer was developed using MODFLOW working under steady-state and transient conditions. Groundwater elevations measured from the piezometric wells distributed throughout the study area in 1973 were selected as the target water levels for steady state (head) model calibration. A transient simulation was undertaken for the 42 years from 1973 to 2015. The historical transient model calibration was satisfactory, consistent with the continuous piezometric decline in response to the increase in groundwater abstraction. The developed numerical model was used to study the system's behavior over the next 35 years under various constraints. Two scenarios for potential groundwater extraction for the period 2015–2050 are presented. The predictive simulations show the effect of the increase of the exploitation on the piezometric levels. To study the phenomenon of salinization, which is one of the most severe and widespread groundwater contamination problems, especially in coastal regions, a solute transport model has been constructed by using MT3DMS software coupled with the groundwater flow model. The best calibration results are obtained when the connection with the overlying superficial aquifer is considered suggesting that groundwater contamination originates from this aquifer. Recommendations for water resource managers

• The results of this study show that Groundwater resources of Jeffara of Medenine coastal aquifer in Tunisia are under immense pressure from multiple stresses.
• The water resources manager must consider the impact of economic and demographic development in groundwater management to avoid the intrusion of saline water.
• The results obtained presented some reference information that can serve as a basis for water resources planning.
• The model runs to provide information that managers can use to regulate and adequately control the Jeffara of Medenine water resources.

     

3D打印贝壳仿生复合材料的拉伸力学行为

采用硬质和软质双组分材料,通过调控两种基体材料的装配夹角,采用光固化3D打印技术制备了不同装配方式的仿贝壳珍珠层复合材料,开展了准静态拉伸实验,结合扫描电镜观察,分析了其拉伸力学性能、断裂及能量耗散机理。研究结果表明,保持胞元边长不变,随着面内装配角度增加,仿贝壳珍珠层复合材料的强度呈线性增加趋势,断裂应变呈线性减小的趋势;随着面外装配角度增大,断裂应变呈线性减小趋势,而强度在面外装配角小于45°时呈增强趋势,超过45°时趋于稳定;面外装配角度为45°时,材料的强度达到最大值。试样在断裂前主要通过硬质材料的拔出、软/硬相界面处微裂纹的生成及微裂纹在扩展过程中的合并和偏转等方式耗散能量。     

Time-resolved photoluminescence study of excited states in nanostructured melanin

Abstract

Time resolved emission spectra (TRES), 3D maps of photoluminescence excitation-emission (PLE maps), 3D maps of TRES, and kinetics of photoluminescence (PL) spectra of natural and synthetic melanin, as well as melanin composites with surfactant, sodium dodecyl benzenesulfonate, have been studied. The kinetics of PL and TRES for the melanin and the composites were investigated at low temperatures that allowed to discuss melanin’s intermolecular complexation, nano-aggregation and formation of charge transfer states. Particularly, the radiation of Frenkel excitons from fragments of different degrees of conjugation that are the parts of molecular nanodisks of melanin is observed. Furthermore, charge transfer excitons (CT-excitons) can be formed and observed at both room and helium temperatures. Some bands in the PL spectra of melanin, depending on temperature, behave like excimer radiation. The studies are aiming to understand the electronic properties of various melanins, particularly natural ones.